1. The K series reducer is manufactured in accordance with international technical requirements and has a high technological content.
2. Space-saving, reliable and durable, with high overload capacity, the power can reach more than 200KW.
3. Low energy consumption, superior performance, and the efficiency of the reducer is as high as 95%.
4. K spiral bevel gear reducer has low vibration, low noise and high energy saving.
5. Select high-quality section steel material, rigid cast iron box body, and the surface of the gear is subjected to high-frequency heat treatment.
6. After precision machining, the reducer that constitutes the helical gear, bevel gear, and bevel gear transmission assembly is equipped with various types of motors to form mechatronics, which fully guarantees the quality characteristics of the reducer motor product. Understanding the principle of the reducer is essential for use, The maintenance of the reducer and the selection of the reducer play a key role.
2. Installation, use and maintenance of K series gear reducer
The reducer that is newly put into operation has been filled with L-CKC100~L-CKC220 medium extreme pressure industrial gear oil in GB/T5903 when leaving the factory. After 200~300 hours of operation, the oil should be changed for the first time. The quality of the oil should be checked regularly, and the oil mixed with impurities or deteriorated must be replaced in time.
Under normal circumstances, for a reducer that has been working continuously for a long time, the new oil should be replaced every 5000 hours or once a year. , shall not be mixed with oils of different grades, and oils of the same grade but with different viscosities are allowed to be mixed.
When changing the oil, wait for the reducer to cool down until there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil will increase and it will be difficult to drain the oil. Note: Cut off the power supply of the transmission device to prevent unintentional power-on!
During work, when the temperature rise of the oil exceeds 80°C or the temperature of the oil pool exceeds 100°C or abnormal noise is generated, stop using it, check the cause, eliminate the fault, and replace the lubricating oil before continuing to operate.
The user should have reasonable rules and regulations for use and maintenance, and should carefully record the operation of the reducer and the problems found in the inspection, and the above regulations should be strictly implemented.
3. Technical parameters of K series reducer:
Power: 0.18KW～200KW
Torque: 10N·m～58500N·m
Output speed: 0.08～263r/min
Four, K series reducer structure:
K-shaft extension, foot installation KA-shaft-mounted connection
KF-shaft extension, flange installation KAF-shaft installation, flange installation
S- means shaft input
The combination of K..R.. two models can form a large transmission ratio, and the K reducer can also be combined with the R series reducer of the same series.
Five, K series reducer equipped with commonly used motor parameters:
Motor class F insulation, IP54 protection, 380 volts, 50 Hz three-phase asynchronous motor, suitable for operation under ambient temperature -10°C to +40°C, altitude 1000m, if the above operating conditions are exceeded. Please contact the reducer manufacturer.
6. Input power, transmission ratio range and allowable torque of K series reducer:
Model 37 47 57 67 77 87
Structure K, KA, KF, KAF KAZ, KAT, KAB
Input power (KW) 0.18-3.0 0.18-3.0 0.18-5.5 0.18-5.5 0.37-11 0.75-22
Transmission ratio 5.36-106.38 5.81-131.87 6.57-145.14 7.14-144.79 7.24-192.18 7.19-197.37
Allowable torque (N.m) 200 400 600 820 1550 2700
Model 97 107 127 157 167 187
Structure K, KA, KF, KAF, KAZ, KAT, KAB
Input power (KW) 1.1-30 3-45 7.5-90 11-160 11-200 18.5-200
Transmission ratio 8.95-176.05 8.74-141.46 8.68-146.07 12.65-150.41 17.28-163.91 17.27-180.78
Allowable torque (N.m) 4300 8000 13000 18000 32000 50000
Seven, K series reducer weight:
Model 37 47 57 67 77 87 97 107 127 157 167 187
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian
Indonesian
Vietnamese
Send Email