Contact us

Name: Sophie Liu

E-mail: sophieliu@goldcanaan.com

Add: Rm2914C,29/F,Ho King Commercial Centre KowLoon HongKong

Skype: xiaoyong888888

QQ: 3538065350

  • xiaoyong888888-Click To Talk
  • sophieliu@goldcanaan.com-Send Email to me!

HOME >> products >>VV32(VLV32) & VV33(VLV33) 0.6/1kV PVC POWER CABLE

VV32(VLV32) & VV33(VLV33) 0.6/1kV PVC POWER CABLE

VV32(VLV32) & VV33(VLV33) 0.6/1kV PVC POWER CABLE
Product name : VV32(VLV32) & VV33(VLV33) 0.6/1kV PVC POWER CABLE
Item :
Details :
VV32(VLV32):Copper (aluminum) core PVC insulated fine steel wire armoured PVC sheathed power cable
VV33(VLV33):Copper (aluminum) core PVC insulated fine steel wire armoured PE sheathed power cable
(Including flame retardant power cable, fire-resisting power cable, and low halogen, low smoke and flame retardant power cable)
 
Application:This product is mainly designed for electrical power transmission and distribution lines with AC rated voltage UO/U of 0.6/1 kV and below.
 
Notes:
1.For flame retardant power cable, add “ZA”(“ZB” or “ZC”) before the model number of common power cable.
2.For fire-resisting power cable, add “N-” before the model number of common power cable.
3.For low halogen, low smoke and flame retardant power cable, add a “DDZ” before the model number of common power cable.
4. For waterproof power cable, add “FS-” before the model number of common power cable.
 
Standards Applied:
GB/T12706.1-2002, IEC60502 and GB/T19666-2005 are applied for this product.
 
Technical Data
1. Rated voltage UO/U is 0.6/1 kV.
2. Rated maximum operating temperature of cable conductor is 70℃ 
3. Short circuit temperature (continuing for less then 5s);
   ≤160℃ (while cross-sectional area ≤300mm² ) 
   ≤140℃ (while cross-sectional area  >300mm² )
4. When cable is installed, the ambient temperature shall be not low than 0℃.and the minimum bending radius shall meet the following table.
5. Laying method of cable: aerial way, cable pit, burial and etc. can be used. 
 
Parameter of products
(Note: For single-core armored power cable, non-magnetic material is used as armor layer or cable construction which can reduce magnet loss is adopted.)
Voltage class: 0.6/1 kV   
Mode:VV32(VLV32),ZA (ZB, ZC)-VV32,ZA (ZB, ZC)-VLV32
          VV33(VLV33),  ZA (ZB, ZC)-VV33,ZA (ZB, ZC)-VLV33
 
[Next : ]→